Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

NIMI Mock Test 2nd Year Electrician Theory: यह चैप्टर वाइज MCQ आपके अध्ययन और बेहतर बनाने का एक महत्वपूर्ण संसाधन है जिसे ITI छात्रों को इलेक्ट्रीशियन थ्योरी में महारत हासिल करने में मदद करने के लिए डिज़ाइन किया गया है।

इलेक्ट्रीशियन थ्योरी द्वितीय वर्ष निम्मी मॉक टेस्ट आपके सिलेबस और न्यू पैटर्न के आधार पर अध्याय-वार एवं बहुविकल्पीय प्रश्नों के साथ तैयार किए गए है। यह आपकी तैयारी को मजबूत करने और आत्मविश्वास के साथ अपनी परीक्षाओं में सफल होने के लिए एक उत्कृष्ट संसाधन है।

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

WhatsApp Channel Join Now
Telegram Channel Join Now

Nimi Mock Test 2nd Year Electrician Theory

विषय:Nimi Mock Test 2nd Year Electrician Theory
अपडेट:नया 2025 अपडेटेड
भाषा:अंग्रेज़ी / हिंदी
प्रश्न:अध्यायवार
समय:प्रति प्रश्न 60 सेकंड
अन्य:निम्मी मॉक टेस्ट क्या हैं?

आईटीआई इलेक्ट्रीशियन 2nd Year थ्योरी निम्मी मॉक टेस्ट ऑनलाइन लगाने के लिए मॉड्यूल में अध्याय वार विषय के नीचे दिए गए Start बटन पर क्लिक करें।

Module 1: DC Generater – डीसी जेनरेटर

0%

Module-1: DC Generator / डीसी जेनरेटर (कुल प्रश्न-56)

1 / 56

Q. What is the name of D.C. generator's field? | D.C. जनरेटर फील्ड का नाम क्या है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

2 / 56

Q. Which voltage drop is indicated in the portion marked as ‘X’? | किस वोल्टेज ड्रॉप को "X" के रूप में चिन्हित किया गया है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

3 / 56

Q. What is the formula for dynamically induced emf? | गतिशील रूप से प्रेरित ईएमएफ के लिए सूत्र क्या है?

4 / 56

Q. Why the armature core of a D.C. generator is laminated? | क्यों एक डीसी जनरेटर के आर्मेचर कोर पटलित है?

5 / 56

Q. What is the name of the compound generator, if the shunt field is connected in parallel with armature? | कंपाउंड जनरेटर का नाम क्या है, यदि शंट फील्ड आर्मेचर के साथ समानांतर में जुड़ा हुआ है?

6 / 56

Q. Why D.C. generators are loosing their residual magnetism? | क्यों डीसी जनरेटर अपने अवशिष्ट चुंबकत्व खो देते हैं?

7 / 56

Q. What is the effect in D.C generator, if it is kept ideal for long time? | D.C. जनरेटर में क्या प्रभाव होता है, अगर इसे लंबे समय तक बंद रखा आए?

8 / 56

Q. What is the purpose of resistance wire used in the commutator connection in D.C. generator? | डीसी जनरेटर में कम्यूटेटर संयोजन में प्रयुक्त प्रतिरोध तार का उद्देश्य क्या है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

9 / 56

Q. Why the pole cone stampings are laminated in D.C. generator? | क्यों पोल कोर स्टॉपिंग डीसी जनरेटर में पटलित करते हैं?

10 / 56

Q. Which method is used to improve the Insulation resistance in D.C. generator? | डीसी जनरेटर में इन्सुलेशन प्रतिरोध को बेहतर बनाने के लिए किस विधि का उपयोग किया जाता है?

11 / 56

Q. What is the name of the D.C generator? | डी.सी. जनरेटर का नाम क्या है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

12 / 56

Q. What is the effect on induced emf if the main field flux get distorted in D.C. generator? | यदि मुख्य क्षेत्र का प्रवाह डीसी जनरेटर में विकृत हो जाए, तो प्रेरित ईएमएफ पर क्या प्रभाव पड़ता है?

13 / 56

Q. Which metal is used to make large capacity D.C. generator yoke? | बड़ी क्षमता के डीसी जनरेटर यौक बनाने के लिए किस धातु का उपयोग किया जाता है?

14 / 56

Q. Why the D.C. generator should run in clockwise direction only? | D.C जनरेटर को घड़ी की दिशा में ही क्यों चलना चाहिए?

15 / 56

Q. What is the function of split rings in D.C. generator? | डीसी जनरेटर में स्प्लिट रिंग का क्या कार्य है?

16 / 56

Q. Why solid pole shoes are used in D.C. generator? | D.C. जनरेटर में ठोस पोल शू का उपयोग क्यों किया जाता है?

17 / 56

Q. What is the name of D.C generator? | D.C जनरेटर का नाम क्या है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

18 / 56

Q. Which energy is converted into electrical energy by generator? | जनरेटर द्वारा किस ऊर्जा को विद्युत ऊर्जा में परिवर्तित किया जाता हैं?

19 / 56

Q. Which formula is used to calculate the generated emf in D.C generator? | D.C. जनरेटर में उत्पन्न ईएमएफ की गणना करने के लिए किस सूत्र का उपयोग किया जाता है?

20 / 56

Q. Calculate the emf generated in a 4 pole DC generator with simplex wave wound armature has 1020 conductors and driven at a speed of 1500 rpm, the flux/pole is 0.007 webers? | सिम्प्लेक्स वेव बाउंड आर्मेचर के साथ 4 पोल डीसी जनरेटर में उत्पन्न ईएमएफ की गणना करें जिसमें 1020 कंडक्टर हैं और 1500 आरपीएम की गति से संचालित होते हैं, फ्लक्स/पोल 0.007 वेबर है?

21 / 56

Q. What is the formula to calculate back emf of a D.C motor? | डी.सी. मोटर के बैक ईएमएफ की गणना करने का सूत्र क्या है?

22 / 56

Q. What is the purpose of slot marked as ‘X’? | "X " के रूप में चिन्हित स्लॉट का उद्देश्य क्या है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

23 / 56

Q. Calculate the induced emf of 4 pole dynamo having 1000 rpm lap wound and total number of conductors is 600, the flux/ pole is 0.064 wb? | 4 पोल डायनेमों के प्रेरित ईएमएफ की गणना करें, 1000 rpm लैप वाउंड और कंडक्टरों की कुल संख्या 600 है, फ्लक्स पोल 0.064 wb है?

24 / 56

Q. What is the effect if the shunt field resistance is above critical resistance value in a D.C. generator? | यदि शंट फील्ड प्रतिरोध क्रांतिक प्रतिरोध मान तो क्या प्रभाव पड़ता है डीसी जनरेटर?

25 / 56

Q. What is the cause for heavy sparking in brushes of D.C  generator? | डीसी जनरेटर के ब्रश में भारी स्पार्किंग का कारण क्या है?

26 / 56

Q. Which type of D.C. generator is used for electroplating process? | इलेक्ट्रोप्लेटिंग प्रक्रिया के लिए किस प्रकार के डीसी जनरेटर का उपयोग किया जाता है?

27 / 56

Q. Which are the two points that the brush contact resistance measured in D.C. machines? | डीसी मशीनों में, वे कौन से दो बिंदु है जो ब्रश संपर्क प्रतिरोध को मापते हैं?

28 / 56

Q. What is the name of the part marked ‘X’ in D.C. generator? | डी.सी. जनरेटर में ‘X’ के रूप में चिहिनत भाग का नाम क्या है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

29 / 56

Q. What is the name of the generator if its field is connected in parallel with armature? | जनरेटर का नाम क्या है, यदि इसका क्षेत्र आर्मेचर के समानांतर जुड़ा हुआ है?

30 / 56

Q.Why armature resistance of a D.C generator is very low? | डी.सी. जनरेटर का आर्मेचर प्रतिरोध बहुत कम क्यों है?

31 / 56

Q. How interpoles are connected in a D.C. generator? | डीसी जनरेटर में इंटरपोल कैसे जुड़े होते हैं?

32 / 56

Q. Name the part of DC generator? | डीसी जनरेटर के भाग का नाम बताइए?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

33 / 56

Q. What is the principle of D.C. generator? | D.C. जनरेटर का सिद्धांत क्या है?

34 / 56

Q. Why compensating winding is provided large D.C. generators? | बड़े डीसी जनरेटर में घुमावदार क्षतिपूर्ति क्यों प्रदान की जाती है?

35 / 56

Q. How the effect of armature reaction can be neutralized in large D.C. generators? | बड़े डीसी जनरेटर में आर्मेचर प्रतिक्रिया के प्रभाव को कैसे बेअसर किया जा सकता है?

36 / 56

Q. What is the name of the part marked as ‘X’ in DC generator? | डीसी जनरेटर में ’X’ के रूप में चिन्हित भाग का नाम क्या है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

37 / 56

Q. Which material is used to make brush in generator? | जनरेटर में ब्रश बनाने के लिए किरा सामग्री का उपयोग किया जाता है?

38 / 56

Q. How many parallel paths in duplex lap winding of a 4 pole DC generator? | 4 पोल डीसी जनरेटर के डुप्लेक्स लैंप वाइंडिंग में कितने समानांतर रास्ते हैं?

39 / 56

Q. Why  the terminal voltage decreases if load increases in D.C. shunt generator? | डीसी शंट जनरेटर में लोड बढ़ने पर टर्मिनल वोल्टेज कम क्यों हो जाता है?

40 / 56

Q. What is the purpose of pole shoe in D.C. generator? | डीसी जनरेटर में पोल शू का उद्देश्य क्या है?

41 / 56

Q. Which rule is used to find direction of magnetic field? | चुंबकीय क्षेत्र की दिशा ज्ञात करने के लिए किस नियम का प्रयोग किया जाता है?

42 / 56

Q. Which rule is used to find the direction of induced emf in D.C generator? | D.C. जनरेटर में प्रेरित ईएमएफ की दिशा जात करने के लिए किस नियम का उपयोग किया जाता है?

43 / 56

Q. What is the purpose of field calls in D.C generator? | D.C. जनरेटर में फील्ड कॉइल का उद्देश्य क्या है?

44 / 56

Q. What is the name of the part of D.C. generator? | डीसी जनरेटर के भाग का नाम क्या है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

45 / 56

Q. What is the effect of armature reaction in D.C. generator? | डीसी जनरेटर में आर्मेचर प्रतिक्रिया का प्रभाव क्या है?

46 / 56

Q. Which type of D.C. generator is used for welding? | आर्क वेल्डिंग के लिए किस प्रकार के D.C जनरेटर का उपयोग किया जाता है?

47 / 56

Q. Which type of voltage is induced dynamically in a D.C. generator? | D.C. जनरेटर में किस प्रकार का वोल्टेज गतिशील रूप से प्रेरित होता है?

48 / 56

Q. Which metal is used to make pole core of Large D.C. generator machines? | बड़े डीसी  जनरेटर मशीनों के पोल कोर बनाने के लिए किस धातु का उपयोग किया जाता है?

49 / 56

Q. What is the function of split rings in a D.C generator? | डीसी जनरेटर में स्प्लिट रिंग्स का क्या कार्य है?

50 / 56

Q. Which type of D.C. Generator works in absence of residual magnetism? | अवशिष्ट चुंबकत्व के अभाव में किस प्रकार का D.C. जेनरेटर काम करता है?

51 / 56

Q. What is the purpose of compensating winding in D.C. generator? | डीसी जनरेटर में कम्पन्सेटिंग वाइंडिंग का उद्देश्य क्या है?

52 / 56

Q. What is the necessity of residual magnetism in a self excited D.C. generator? | एक स्वयं उत्तेजित डीसी जनरेटर में अपशिष्ट चुंबकत्व की आवश्यकता क्या है?

53 / 56

Q. How does the magnetic circuit complete through the yoke and and poles in a generator? | एक जनरेटर में योक और ध्रुव के माध्यम से चुंबकीय सर्किट कैसे पूरा होता है?

54 / 56

Q. What is the reason for D.C. generator fails to build up voltage? | डीसी जनरेटर के वॉल्टेज का निर्माण करने में विफ़ल होने का क्या कारण है?

55 / 56

Q. What is the property of wave winding in D.C. generator? | D.C जनरेटर में तरंग वाइंडिंग की विशेषता क्या है?

56 / 56

Q. Which type of D.C. generator is used for long distance distribution lines? | लंबी दूरी की वितरण लाइनों के लिए किस प्रकार के डीसी जनरेटर का उपयोग किया जाता है?

Your score is

0%

Module 2: DC Motor – डीसी मोटर

0%

Module 2: DC Motor / डीसी मोटर (कुल प्रश्न-68)

1 / 68

Q. Why the direction of rotation is changed only by changing the armature current direction in a D.C. compound motor? | D.C मिश्रित मोटर में आर्मेचर धारा दिशा को बदलकर केवल घूर्णन की दिशा क्यों बदल दी जाती है?

2 / 68

Q. Which insulating material used in winding is a highly non-hygroscopic and possess good electrical strength? | वाइंडिंग में उपयोग की जाने वाली कौन सी कुचालक सामग्री एक अत्यधिक गैर-हीयोस्कोपिक (नमी न सोखने वाली है) और अच्छी विदयुत शक्ति रखती है?

3 / 68

Q. Which winding fault is determined by the test? | कौन सा वाइंडिंग दोष इस परीक्षण द्वारा ज्ञात किया जाता है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

4 / 68

Q. What is the best method to change the DOR of a compound motor without change of its characteristics? | किसी यौगिक मोटर की विशेषताओं के बिना बदले, DOR बदलने के लिए सबसे अच्छी विधि क्या है?

5 / 68

Q. Which D.C. compound motor is operated at constant speed under varying load? | किस डीसी कंपाउंड मोटर को अलग-अलग लोड पर नियत गति से संचालित किया जा सकता है?

6 / 68

Q. How No volt coil is connected in a three point starter with DC shunt motor? | डीसी शंट मोटर के साथ तीन पॉइंट स्टार्टर में नो वोल्ट कॉइल कैसे जुड़ा होता है?

7 / 68

Q. What is the name of the equipment? | उपकरण का नाम क्या है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

8 / 68

Q. Which rule determines the direction of current in D.C motor? | डीसी मोटर में करंट की दिशा किस नियम से निर्धारित होती है?

9 / 68

Q. Which is the most effective method of balancing armature? | आर्मेचर को संतुलित करने का सबसे प्रभावी तरीका कौन सा है?

10 / 68

Q. What is the necessity of starter for D.C. motor? | D.C. मोटर के लिए स्टार्टर की क्या आवश्यकता है?

11 / 68

Q. Why shunt field coil is connected in series with holding coil in D.C. three point starter? | शंट फील्ड कॉइल को D.C. थ्री पॉइंट स्टार्टर में होल्डिंग कॉइल के साथ श्रृंखला में क्यों जोड़ा जाता है?

12 / 68

Q. How many parallel paths in duplex lap winding in the armature of 4 pole D.C. Motor? | 4 पोल D.C. मोटर की आर्मेचर में डुप्लेक्स लैप वाइंडिंग में कितने समानांतर रास्ते हैं?

13 / 68

Q. Which type of D.C. motor is used in elevators? | लिफ्ट में किस प्रकार की डीसी मोटर का उपयोग किया जाता है?

14 / 68

Q. Why carbon composition brush requires in the armature circuit to operate the D.C. motor? | D.C. मोटर को संचालित करने के लिए आर्मेचर सर्किट में कार्बन कंपोजिशन ब्रश की आवश्यकता क्यों होती है?

15 / 68

Q. What is the name of winding. if coil pitch is less than pole pitch? | यदि क्ववाइल पिच, पोल पिच से कम है. तो वाइंडिंग का नाम क्या है?

16 / 68

Q. What is the temperature value of class 'F' insulation? | श्रेणी 'F' इन्सुलेशन का तापमान मान क्या है?

17 / 68

Q. Which winding wire is used for DC field coil? | डीसी फील्ड कॉइल के लिए किस वाइंडिंग तार का सुपर इनेमल्ड तांबे के उपयोग किया जाता है?

18 / 68

Q. What reduces the cross sectional area of core material for VA rating? | वीए रेटिंग के लिए कोर सामग्री के क्रॉस सेक्शनलक्षेत्र को क्या कम करता है?

19 / 68

Q. Which instrument is used to measure armature winding resistance? | आर्मेचर वाइंडिंग प्रतिरोध को मापने के लिए किस उपकरण का उपयोग किया जाता है?

20 / 68

Q. What is the purpose of series resistor connected with holding coil in a D.C. four point starter? | डीसी चार पॉइंट स्टार्टर में होल्डिंग कॉइल से जुड़े श्रेणी प्रतिरोधक का उद्देश्य क्या है?

21 / 68

Q. Which method of speed control gives below the rated speed in D.C. series motor? | गति नियंत्रण का कौन सा तरीका डीसी श्रेणी मोटर में रेटेड गति के नीचे गति देता है?

22 / 68

Q. Which speed control system provides a smooth variation of speed from zero to above normal? | कौन सी गति नियंत्रण प्रणाली शून्य से सामान्य से अधिक तक गति को एक आसान बदलाव प्रदान करता है?

23 / 68

Q. What is the formula to calculate back EMF in a D.C. motor? | D.C. मोटर में EMF की गणना करने का सूत्र क्या है?

24 / 68

Q. What is the action of the induced emf in a running D.C. motor? | चल रही DC मोटर में प्रेरित ईएमएफ की क्रिया क्या है?

25 / 68

Q. Why the newly rewound armature must be preheated before vamishing? | वार्निशिंग से पहले नए रीवाउंड आर्मेचर को गरम क्यों किया जाना चाहिए?

26 / 68

Q. Which type of D.C. motor is used for constant speed drives? | निरंतर गति ड्राइव के लिए किस प्रकार की D.C मोटर का उपयोग किया जाता है?

27 / 68

Q. Which type of test is illustrated for the armature after rewound? | प्रतिक्षेप के बाद आर्मेचर के लिए किस प्रकार का परीक्षण चित्रित किया गया है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

28 / 68

Q. What is the name of the speed control method of DC motor? | डीसी मोटर की गति नियंत्रण विधि का क्या नाम है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

29 / 68

Q. Which type of instrument is used to test the armature winding? | | आर्मेचर वाइंडिंग का परीक्षण करने के लिए किस प्रकार के उपकरण का प्रयोग किया जाता है?

30 / 68

Q. Which type of speed control of D.C. series motor? | D.C. श्रृंखला मोटर का गति नियंत्रण किस प्रकार का है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

31 / 68

Q. Why the D.C. series motor field winding is wound with thick wire? | D.C. श्रृंखला मोटर की फील्ड वाइंडिंग मोटी तार के साथ वाउंड क्यों है?

32 / 68

Q. Which formula is used to calculate the speed of D.C. motor ? | डीसी मोटर की गति की गणना करने के लिए किस सूत्र का उपयोग किया जाता है?

33 / 68

Q. Why commutators are sparking heavily? | कम्यूटेटर क्यों तेज चमक उत्पन्न कर रहा है?

34 / 68

Q. Which type of D.C. armature winding the front pitch (Yf) is greater than back pitch (Ye)? |  किस प्रकार की डीसी आर्मेचर फ्रंट पिच (Yf) पीछे की पिच (Yb) से अधिक है?

35 / 68

Q. Where D.C. compound motors are preferred? | कहाँ D.C. मिश्रित मोटरों को प्राथमिकता दी जाती है?

36 / 68

Q. What is the formula to calculate the current taken by D.C. shunt motor armature? | D.C. शंट मोटर आर्मेचर द्वारा ली गई धारा की गणना करने का सूत्र क्या है?

37 / 68

Q. Which type of armature winding is illustrated? | किस प्रकार की आर्मेचर वाइंडिंग का चित्रण किया गया है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

38 / 68

Q. What is the operation in the rewinding process? | रिवाइंडिंग प्रक्रिया में यह क्रिया क्या है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

39 / 68

Q. How to obtain opposite polarity in adjacent poles of a 4 pole DC motor? | 4 ध्रुव डीसी मोटर में आसन्न धुवों में विपरीत ध्रुवता कैसे प्राप्त करें?

40 / 68

Q. What is the purpose of resistor connected with holding coil in 4 point starter? | 4 बिंदु स्टार्टर में होल्डिंग कॉइल से जुड़े प्रतिरोधक का उद्देश्य क्या है?

41 / 68

Q. Which insulating material belongs to class 'B' insulation? | कौन सी कुचालक सामग्री श्रेणी “बी” के कुचालक की है?

42 / 68

Q. Which type of D.C. motor is suitable for shearing machines? | कतरनी मशीनों के लिए कौन सी प्रकार की D.C. मोटर उपयुक्त है?

43 / 68

Q. How the direction of rotation of a D.C. compound motor is changed? | डीसी कंपाउंड मोटर के घूर्णन की दिशा कैसे बदली जाती है?

44 / 68

Q. Which material is used for starting resistance of D.C. starters? | डीसी स्टार्टर्स के प्रतिरोध को शुरू करने के लिए किस सामग्री का उपयोग किया जाता है?

45 / 68

Q. What is the name of D.C. motor? | D.C. मोटर का नाम क्या है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

46 / 68

Q. Which type of armature winding is illustrated? | किस प्रकार की आर्मेचर वाइंडिंग का चित्रण किया गया है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

47 / 68

Q. What is the effect in a D.C. shunt motor, if its supply terminals are interchanged? | डी सी शंट मोटर में क्या प्रभाव पड़ता है. यदि इसकी आपूर्ति टर्मिनलों को आपस में बदल दिया जाता है?

48 / 68

Q. Which rule determines the direction of rotation of armature in D.C. motor? | डी.सी. मोटर में आर्मेचर के घूमने की दिशा कौन सा नियम निर्धारित करता है?

49 / 68

Q. Why starters are required to start D.C. motors in industries? | उद्योगों में D.C मोटर्स को शुरू करने के लिए स्टॉर्टर क्यों आवश्यक है?

50 / 68

Q. Why the series field is short circuited at the time of starting in differential compound motor? | डिफरेंशियल कंपाउंड मोटर में शुरू करने के समय श्रेणी क्षेत्र को लघुपथित क्यों किया जाता है?

51 / 68

Q. Which growler test for armature is illustrated? | आर्मेचर के लिए कौन सा ग्राउलर परीक्षण सचित्र है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

52 / 68

Q. Calculate the average pitch (Ya) for retrogressive wave winding, if No. of armature conductor = 14, No. of slots = 7, No. of poles = 2 | रिट्रॉग्रेसिव वेव वाइंडिंग के लिए औसत पिच (Ya) की गणना करें, यदि, आर्मेचर कंडक्टर की संख्या= 14, स्लॉट की संख्या = 7. ध्रुवों की संख्या-2.

53 / 68

Q. Which speed control method is used in food mixture motors? | खाद्य मिश्रण मोटर्स में किस गति नियंत्रण विधि का उपयोग किया जाता है?

54 / 68

Q. Which rule is applied to identify the direction of flux in D.C. motor? | डीसी मोटर में फ्लक्स की दिशा की पहचान करने के लिए कौन सा नियम लागू किया जाता है?

55 / 68

Q. Which speed control method is applied to obtain both below normal and above normal speed in D.C. motor? | डीसी मोटर में सामान्य से ऊपर और नीचे दोनों गतियों को प्राप्त करने के लिए किस गति नियंत्रण विधि को लागू किया जाता है?

56 / 68

Q. What is the purpose of NVC connected in series with the field in 3 point starter? | 3 बिंदु स्टार्टर में क्षेत्र के साथ श्रृंखला में जुड़े एनवीसी का उद्देश्य क्या है?

57 / 68

Q. Which instrument is used to test armature winding for short and open circuit? | शॉर्ट और ओपन सर्किट के लिए आर्मेचर वाइंडिंग का परीक्षण करने के लिए किस उपकरण का उपयोग किया जाता है?

58 / 68

Q. Which speed control method of D.C. series motor is used for electric train? | D.C. सीरीज मोटर की किस गति नियंत्रण विधि का उपयोग इलेक्ट्रिक ट्रेन के लिए किया जाता है?

59 / 68

Q. Why series motor produce high torque and speed initially without load? | सीरीज़ मोटर बिना भार के आरंभिक उच्च बलाघूर्ण और गति क्यों पैदा करती है?

60 / 68

Q. Which motor has this characteristics curve? | किस मोटर में यह विशेषता है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

61 / 68

Q. What is the speed, if field winding of a D.C. shunt motor is in open circuit? | यदि डीसी शंट मोटर की फील्ड वाइंडिंग ओपन सर्किट में हो, तो गति क्या है?

62 / 68

Q. What is the reason for reduction in speed of a D.C. shunt motor from no load to full load? | शून्य भार से पूर्ण भार में डी सी शंट मोटर की गति कम होने का क्या कारण है?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

 

63 / 68

Q. Why the holding coil of a 3 point starter is connected in series with shunt field? | 3 पॉइंट स्टार्टर के होल्डिंग कॉइल को शंट फ़ील्ड के साथ श्रृंखला में क्यों जोड़ा जाता है?

64 / 68

Q. What is the purpose of tapes in winding? | वाइंडिंग में टेप का उद्देश्य क्या है?

65 / 68

Q. What is the effect, if a four point starter resistance is cutoff during running? | क्या प्रभाव है, अगर चलने के दौरान चार बिंदु स्टार्टर प्रतिरोध कटऑफ है?

66 / 68

Q. Which type of D.C. motor is used for sudden application of heavy loads? | भारी भार के अचानक भारित करने के लिए किस प्रकार की डीसी मोटर का उपयोग किया जाता है?

67 / 68

Q. Name the type of D.C. motor? | डीसी मोटर के प्रकार को नाम दें?

Nimi Mock Test 2nd Year Electrician Theory: Chapter Wise MCQ

68 / 68

Q. Which speed control methods offers below normal speed in D.C. shunt motor? | डीसी शंट मोटर में सामान्य गति से नीचे कौन सी गति नियंत्रण विधियां प्रदान करती हैं?

Your score is

0%

Module 3: AC Three Phase Motor – एसी थ्री फेज मोटर

Comming soon

Module 4: AC Single Phase Motor – एसी सिंगल फेज मोटर

Comming soon

Module 5: Alternator, Synchronous Motor & MG Set – अल्टरनेटर, सिंक्रोनस मोटर और एमजी सेट

Comming soon

Module 6: Electronics Practice – इलेक्ट्रॉनिक्स प्रैक्टिस

Comming soon

Module 7: Control Panel Wiring and Circuit Breakers & Relays – नियंत्रण पैनल वायरिंग और सर्किट ब्रेकर और रिले

Comming soon

Module 8: AC / DC Motor Devices – एसी / डीसी मोटर उपकरण

Comming soon

Module 9: Inverter / UPS & Electric Vehicle Charging – इन्वर्टर / यूपीएस और इलेक्ट्रिक वाहन चार्जिंग

Comming soon

Module 10: Power Generation, Transmission and Distribution – विद्युत उत्पादन, संचरण और वितरण

Comming soon

Read More:

ITI Electrician Trade Nimi Mock Test: All Subject

● Free Study Material for ITI Electrician Trade

WhatsApp Channel Join Now
Telegram Channel Join Now

Leave a Comment